RFID Reader Module for PSION®-workabout
KI-DHP111/DHP112 with telescope antenna KI-DAP100
The Agrident Reader Modules, KI-DHP111 and KI-DHP112, were specially
designed as add-on equipment for the PSION®-workabout
computer for contact less identification of animals or objects by means
of passive transponders. The reader modules are low price devices
which easily fit on the PSION-workabout computer. They are powered
by the PSION's internal power supply. Thanks to the compact
outline, the low weight, and the ergonomic design, a high operating
comfort is guaranteed. The modules are prepared for the mounting
of the KI-DAP100 telescope antenna.
With the KI-DAP100, it is possible to identify transponders over a
distance of more than 1 meter (39.4-in,). The telescope extension
is easy to handle, extendable and easy to mount.
The Agrident Reader Modules are fully compatible with the ISO
standard 11784/5 and thus read HDX and FDX-B compatible
transponders. Additionally, H4002 compatible transponders can be
read. The transponders are registered in short time within a large
detection area. Reading, controlled by the external processing
unit, is possible in predetermined time intervals or continuous.
The Agrident Reader Modules contain a configurable interface to the
PSION-workabout and enable the user to integrate the RFID technology
into this application very easily. The transponder data, read by
the reader modules, can be made available in different data formats for
further processing by application-specific software. For designing
the user-specific software, powerful programming environments for the
PSION-workabout are available. They guarantee flexibility, fast
operation and optimal adaptation to the users demands. The special
variant KI-DHP112 of the Agrident Reader Module provides the RS232
interface of the PSION-workabout computer. For this purpose the
identification data can also be automatically connected to data of
external units like e.g. a barcode-scanner, a weighing system or similar
devices. Accordingly, the data can also be made available to a PC,
printer, etc. for further processing. If the variant KI-DHP111 is
used, additional data can be linked
to identification data only manually by using the keyboard on the PSION-workabout.
| Technical Data for RFID Reader Module
used with PSION-workabout KI-DHP111/KI-DHP112: |
| Type |
Description |
Data |
| KI-DHP111& KI-DHP112 |
Power Supply |
- via PSION-workabout computer
|
|
Reading Distances |
- Typical 25 cm (9.5-in.) with HDX compatible transponders
with diameter of 30 mm (1.2-in.)
- Typical 20 cm(7.9-in) with FDX-B compatible transponders
with a diameter of 30 mm(1.2-in.)
|
|
Carrier Frequency |
|
|
Transponder Types |
- HDX, FDX-B (ISO 11784/5), and H4002
compatible
|
|
Reading Rates |
|
|
Reading Cycles |
- Typical 2000 with battery operation of the PSION-workabout
computer
- Unlimited with PSION-workabout computer powered by the
mains
|
|
Environmental Conditions |
- Operating 0°C to 50°(C32°F
to 122°F)
- Storage -20°C to 70°C(-4°F
to 158°F )
- Humidity 5 to 95% (non condensing)
|
|
Dimensions/Weight |
- Dimensions (includes antenna): 90 x 33 x 127mm (3.5
x 1.3 x 5-in. )
- Weight: Approximately 150g (0.33-lb.)
|
|
Protection Level |
|
| KI-DHP112 (only) |
Interface |
- RS232, Sub-D, 9 pin, female
|
| KI-DAP100 for KI-DHP111 &
KI-DHP112 |
Telescoping Antenna |
- Mechanical extension of reading
distance for about 1.2m(47.2-in.)
|
|
Weight |
- Approximately 400g(0.88-lb.)
|
|
